PUBLICATIONS
A hundred and thirty-nine technical publications
including two books, twenty-seven refereed journal/book
articles, twenty-six refereed conference proceedings,
twenty-six conference summary papers, thirty conference/symposium
presentations, four invited presentations, four
short courses, and twenty other technical publications
including the Ph.D. Dissertation. .
Books:
E.v.K. Hill, J.L. Walker II, K.K. Heinzer, and
R.T. Holt, AE416/417 Aerospace Structures and Instrumentation:
Class Notes, Homework Problems, and Lab Manual,
Embry-Riddle Aeronautical University, Daytona Beach,
2007
R.K. Miller and E.v.K. Hill, Technical Editors
and P.O. Moore, Editor, Nondestructive Testing Handbook,
3rd Edition: Volume 6, Acoustic Emission Testing,
American Society for Nondestructive Testing, Columbus,
OH, 2005.
Refereed Journal/Book Articles:
E.v.K. Hill, J.L. Walker II and M.D. Dorfman, “Acoustic
Emission Data and Neural Network Analysis,”
accepted for publication in ASNT Industry Handbook:
Aerospace NDT, American Society for Nondestructive
Testing, Columbus, OH, 2010.
E.v.K. Hill, J.O. Karl, S. -A.T. Dion, N.S. Spivey
and J.L. Walker II, “Neural Network Burst
Pressure Predictions in Composite Overwrapped Pressure
Vessels,” accepted for publication in ASNT
Industry Handbook: Aerospace NDT, American Society
for Nondestructive Testing, Columbus, OH, 2010.
E.v.K. Hill and C.L. Rovik, “In-Flight Fatigue
Crack Growth Monitoring in an Aircraft Vertical
Tail," accepted for publication in ASNT Industry
Handbook: Aerospace NDT, American Society for Nondestructive
Testing, Columbus, OH, 2010.
E.v.K. Hill, S. -A.T. Dion, J.O. Karl, N.S. Spivey,
and J.L. Walker II, “Neural Network Burst
Pressure Prediction in Composite Overwrapped Pressure
Vessels,” Journal of Acoustic Emission, Vol. 25, 2008, pp. 187-193.
E.v.K. Hill and R.J. Demeski, “Classification
of Failure Mechanism Data from Fiberglass Epoxy
Tensile Specimens,” Nondestructive Testing
Handbook, Third Edition: Volume 6, Acoustic Emission
Testing, American Society for Nondestructive Testing,
Columbus, OH, 2005, pp. 167-170.
E.v.K. Hill and J. L. Walker II, “Neural
Network Prediction of Burst Pressures in Graphite
Epoxy Pressure Vessels, Nondestructive Testing Handbook,
Third Edition: Volume 6, Acoustic Emission Testing,
American Society for Nondestructive Testing, Columbus,
OH, 2005, pp. 171-176.
J.M. Carlyle, H.L. Bodine and E.v.K. Hill, “Acoustic
Emission Testing of Aircraft,” Nondestructive
Testing Handbook, Third Edition: Volume 6, Acoustic
Emission Testing, American Society for Nondestructive
Testing, Columbus, OH, 2005, pp. 360-366.
E.v.K. Hill and S.G. Vaughn III, “Fatigue
Crack Monitoring of an Aircraft Engine Cowling in
Flight,” Nondestructive Testing Handbook,
Third Edition: Volume 6, Acoustic Emission Testing,
American Society for Nondestructive Testing, Columbus,
OH, 2005, pp. 367-376.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Monitoring of a Rocket Motor Case during Hydrostatic
Testing,” Nondestructive Testing Handbook,
Third Edition: Volume 6, Acoustic Emission Testing,
American Society for Nondestructive Testing, Columbus,
OH, 2005, pp. 377-381.
E.v.K. Hill, “Acoustic Emission Prediction
of Burst Pressures in Fiberglass Epoxy Pressure
Vessels,” Nondestructive Testing Handbook,
Third Edition: Volume 6, Acoustic Emission Testing,
American Society for Nondestructive Testing, Columbus,
OH, 2005, pp. 382-387.
E.C. Fatzinger and E.v.K. Hill, “Low Proof
Load Prediction of Ultimate Loads of Fiberglass/Epoxy
Resin I-Beams from Acoustic Emission,” Journal
of Testing and Evaluation, Vol. 33, No. 5, September
2005, 8 pages (on line).
M.E. Fisher and E.v.K. Hill, “Burst Pressure
Prediction in Filament Wound Composite Pressure
Vessels Using Acoustic Emission,” Materials
Evaluation, Vol. 56, No. 12, 1998, pp. 1395-1401.
J.L. Walker II, S.S. Russell, G.L. Workman and
E.v.K. Hill, “Neural Network/Acoustic Emission
Burst Pressure Prediction for Impact Damaged Composite
Pressure Vessels,” Materials Evaluation, Vol. 55, No. 8, 1997, pp. 903-907.
M. Kouvarakos and E.v.K. Hill, “Isolating
Tensile Failure Mechanisms in Fiberglass/Epoxy from
Acoustic Emission Signal Parameters,” Materials
Evaluation, Vol. 54, No. 9, 1996, pp.1025-1031.
E.v.K. Hill, J.L. Walker II and G.H. Rowell, “Burst
Pressure Prediction in Graphite/Epoxy Pressure Vessels
Using Neural Networks and Acoustic Emission Amplitude
Data,” Materials Evaluation, Vol. 54, No. 6, 1996, pp. 744-748, 754.
E.v.K. Hill and J.L. Walker II, “Backpropagation
Neural Networks for Predicting Ultimate Strengths
of Unidirectional Graphite/Epoxy Tensile Specimens,”
Advanced Performance Materials, Vol. 3, No. 1, 1996,
pp. 75-83.
T.M. Ely and E.v.K. Hill, “Longitudinal Splitting
and Fiber Breakage Characterization in Graphite/Epoxy
Using Acoustic Emission Data,” Materials Evaluation,
Vol. 53, No. 2, 1995, pp. 134-140.
A.F. Almeida and E.v.K. Hill, “Neural Network
Detection of Fatigue Crack Growth in Riveted Joints
Using Acoustic Emission,” Materials Evaluation,
Vol. 53, No. 1, 1995, pp. 76-82.
E.v.K. Hill, P.L. Israel and G.L. Knotts, "Neural
Network Prediction of Aluminum-Lithium Weld Strengths
from Acoustic Emission Amplitude Data," Materials
Evaluation, Vol. 51, No. 9, 1993, pp. 1040-1045,
1051.
E.v.K. Hill, “Predicting Burst Pressures
in Filament Wound Composite Pressure Vessels by
Using Acoustic Emission Data,” Materials Evaluation,
Vol. 50, No. 12, 1992, pp. 1439-1445.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Monitoring of a Filament Wound Composite Rocket
Motor Case During Hydroproof,” Materials Evalua¬tion,
Vol. 43, No. 7, 1985, pp. 859 863.
E.v.K. Hill, “A General Normal Mode Solution
for the Free Vibration of the Rectangular Parallelepiped,”
Journal of the Acoustical Society of America, Vol. 78, No. 4, 1985, pp. 1344 1347.
E.v.K Hill, “The Vibrational Response of
the Rectangular Parallelepiped With Completely Stress
Free Boundaries,” Journal of the Acoustical
Society of America, Vol. 75, No. 2, 1984, pp. 442
446.
Refereed Journal/Book Articles (Continued):
E.v.K. Hill and D.M. Egle, “Acoustic Emission
in Jet Engine Fan Blades,” Materials Evaluation,
Vol. 40, No. 7, 1982, pp. 770 773.
E.v.K. Hill and D.M. Egle, “The Response
of the Rectangular Parallelepiped to a Simulated
Acoustic Emission Burst,” Journal of the Acoustical
Society of America, Vol. 71, No. 4, 1982, pp. 891
901.
E.v.K. Hill and D.M. Egle, “The Forced Vibrational
Response of the Rectangular Parallelepiped with
Rigid Lubricat¬ed Boundaries,” Journal
of Sound and Vibration, Vol. 80, No. 1, 1982, pp. 61 69.
E.v.K. Hill and D.M. Egle, “A Reciprocity
Technique for Estimating the Diffuse Field Sensi¬tivity
of Piezoelec¬tric Transducers,” Journal
of the Acoustical Society of America, Vol. 67, No. 2, 1980, pp. 666 672.
Refereed Conference Proceedings:
J. Suleman, A. Korcak, F.F. Barsoum, and E.v.K. Hill, “Acoustic Emission Monitoring and Neural
Network Fatigue Life Prediction in Steel Bridges,”
Florida Center for Advanced Aero-Propulsion (FCAAP)
– Annual Technical Symposium 2009, Talllahassee,
FL, 13-14 August 2009, 6 pages.
J. Suleman, E.v.K. Hill, E. Villa, and M.A. Okur,
“Neural Network Fatigue Life Prediction in
Aluminum from Acoustic Emission Data,” Aging
Aircraft 2009, The 12th Annual Joint FAA/DoD/NASA
Conference on Aging Aircraft, Kansas City, MO, May
2009, 29 pages.
E.v.K. Hill, Y. Zhao, T. Ebert, J.V. Kay, and G.K. Lewis, “Compression After Impact Strength
Prediction in Composites Using Acoustic Emission
and Neural Networks,” 49th AIAA/ASME/ASCE//AHS/ASC
Structures, Structural Dynamics, and Materials (SDM)
Conference, Schaumburg, IL, April 2008.
E.v.K. Hill, M.D. Dorfman, and Y. Zhao, “Ultimate
Strength Prediction in Fiberglass/Epoxy Beams Using
Acoustic Emission Amplitude Distribution Data,”
Advances in Acoustic Emission - 2007: Proceedings
of the 6th International Conference on Acoustic
Emission, K. Ono, Editor, Acoustic Emission Working
Group and Acoustic Emission Group, Encino, CA, 2007,
pp. 330-335.
E.v.K. Hill, S. -A.T. Dion, J.O. Karl, N.S. Spivey,
and J.L. Walker II, “Neural Network Burst
Pressure Prediction in Composite Overwrapped Pressure
Vessels,” Advances in Acoustic Emission -
2007: Proceedings of the 6th International Conference
on Acoustic Emission, K. Ono, Editor, Acoustic Emission
Working Group and Acoustic Emission Group, Encino,
CA, 2007, pp. 324-329.
Y. Zhao, T. -K. Nguyen and E.v.K. Hill, “After-Impact
Compressive Strength Prediction for Laminated Composites,”
47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics, and Materials (SDM) Conference, Newport,
RI, May 2006.
Y. Zhao, C.D. Hess, E.v.K. Hill and C. -S. Wang,
“Prediction of Residual Strength of Laminated
Composites Subjected to Low Velocity Impact,”
Proceedings of the Society of Plastics Engineers
62nd Annual Technical Conference (ANTEC 2004), Society
of Plastics Engineers, Chicago, 2004, pp. 1369-1373.
C.D. Hess, Y. Zhao, E.v.K. Hill and C. -S. Wang,
“Residual Strength Prediction and Damage Tolerance
Analysis of Carbon/Epoxy Laminates Subjected to
Low Velocity Impact Damage,” ICCE-10: Tenth
International Conference on Composites/Nano Engineering,
University of New Orleans, 2003, pp. 239-240.
K.M. Kostreva and E.v.K. Hill, “Classification
of Acoustic Emission Data from Graphite/Epoxy
Failure Mechanisms Using Neural Networks,”
Fourth International Conference on Nonlinear
Problems in Aviation & Aerospace, European
Conference Publications, Cambridge, 2003, pp. 281-288. D.R. Lendzioszek, E.v.K. Hill and R.J. Demeski,
“Neural Network Classification and Modeling
of Acoustic Emission Data from a Fiberglass/Epoxy
Tensile Test Specimen,” Fourth International
Conference on Nonlinear Problems in Aviation &
Aerospace, European Conference Publications, Cambridge,
2003, pp. 297-302.
E.v.K. Hill, S.M. Abedi and J.L. Walker II, “Acoustic
Emission Weld Monitoring in the 2195 Aluminum-Lithium
Alloy,” Fourth International Conference on
Nonlinear Problems in Aviation & Aerospace,
European Conference Publications, Cambridge, 2003,
pp. 187-193.
D.L.W. Ballard, E.v.K. Hill and J.B. Allen, “Acoustic
Emission Detection of Fatigue Crack Growth in Edge-Welded
Metal Bellows,” Second International Conference
on Nonlinear Problems in Aviation & Aerospace,
Vol. 1, European Conference Publications, Cambridge,
1999, pp. 73-78.
C.L. Rovik, S.G. Vaughn III, E.v.K. Hill and R.J. Demeski, “Fatigue Crack Monitoring of Aircraft
Structures Using Acoustic Emission,” Second
International Conference on Nonlinear Problems in
Aviation & Aerospace, Vol. 2, European Conference
Publications, Cambridge, 1999, pp. 657-664.
J.M. Carlyle, H.L. Bodine, S.S. Henley, R.L. Dawes,
E.v.K. Hill and R. Demeski, “Practical AE
Methodology for Use on Aircraft,” Acoustic
Emission: Standards and Technology Update, ASTM
STP 1353, American Society for Testing and Materials,
West Conshohocken, PA, 1999, pp. 191-205.
E.v.K. Hill and M.E. Fisher, “Burst Pressure
Prediction in Filament Wound Composite Pressure
Vessels Using Acoustic Emission,” Sixth International
Symposium on Acoustic Emission from Composite Materials
(AECM-6), American Society for Nondestructive Testing,
Columbus, OH, 1998, pp. 71-81.
J.L. Walker II, S.S. Russell, G.L. Workman and
E.v.K. Hill, “Neural Network Burst Pressure
Prediction in Impact Damaged Kevlar/Epoxy Bottles
From Acoustic Emission Amplitude Data,” First
International Conference on Nonlinear Problems in
Avaition & Aerospace, Embry-Riddle Aeronautical
University Press, Daytona Beach, FL, 1997, pp. 673-678.
M.E. Fisher and E.v.K. Hill, “Burst Pressure
Prediction in Fiberglass/Epoxy Pressure Vessels
Using Acoustic Emission and Neural Networks,”
First International Conference on Nonlinear Problems
in Aviation & Aerospace, Embry-Riddle Aeronautical
University Press, Daytona Beach, FL, 1997, pp. 203-208.
J.L. Walker II and E.v.K. Hill, “An Introduction
to Neural Networks: a Tutorial,” First International
Conference on Nonlinear Problems in Aviation &
Aerospace, Embry-Riddle Aeronautical University
Press, Daytona Beach, FL, 1997, pp. 667-672.
M.L. Marsden and E.v.K. Hill, “Classification
of Fatigue Cracking Data in a Simulated Aircraft
Fuselage Using a Self-Organizing Map,” First
International Conference on Nonlinear Problems in
Aviation & Aerospace, Embry-Riddle Aeronautical
University Press, Daytona Beach, FL, 1997, pp. 405-410.
H.L. Bodine, R.L. Dawes, S.S. Henley and E.v.K. Hill, “Detecting Crack Growth in Metal Structures
Using Temporal Processing and the Parametric Avalanche
Stochastic Filter Neural Network,” Intelligent
Engineering Systems Through Artificial Neural Networks,
Volume 5, Fuzzy Logic and Evolutionary Programming,
ASME Press, New York, NY, 1995, pp. 467-472.
E.v.K. Hill and G.L. Knotts, “A Neural Network
for Predicting Ultimate Strengths of Aluminum-Lithium
Welds from Acoustic Emission Data,” Nondestructive
Characterization of Materials VI, R.E. Green, Jr. ,
K.J. Kozaczek, and C.O. Ruud, Editors, Plenum Publishing
Company, New York, NY, 1994, pp. 183-190.
T.M. Ely and E.v.K. Hill, “Characterization
of Failure Mechanisms in Graphite/Epoxy Tensile
Test Specimens Using Acoustic Emission Data,”
Fourth International Symposium on Acoustic Emission
from Composite Materials, American Society for Nondestructive
Testing, Columbus, OH, 1992, pp. 187-199.
J.L. Walker II and E.v.K. Hill, “Low Amplitude
Acoustic Emission Characterization and Ultimate
Strength Prediction of ASTM D-3039 Tensile Specimens,”
Fourth International Symposium on Acoustic Emission
from Composite Materials, American Society for Nondestructive
Testing, Columbus, OH, 1992, pp. 115-131.
E.v.K. Hill, “Burst Pressure Prediction in
45.7 cm (18 inch) Diameter Graphite/Epoxy Pressure
Vessels Using Acoustic Emission Data,” Proceedings
of the 36th International SAMPE Symposium and Exhibition,
Vol. 36, Society for the Advancement of Material
and Process Engineering, Covina, CA, 1991, pp. 272-283.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Burst Pressure Prediction in 14.6 cm (5.75 inch)
Diameter Fiberglass/Ep¬oxy Pressure Vessels,”
Proceedings of the 35th International SAMPE Symposium
and Exhibition, Vol. 35 Society for the Advance¬ment
of Material and Process Engineering, Covina, CA,
1990, pp. 2189-2201.
E.v.K. Hill and D.M. Egle, “Reciprocity Calibration
of Piezoelectric Transducers in a Diffuse Field,”
Paper No. CR 26, Society for Experimental Stress
Analysis Spring Meeting, Wichita, KS, 14 19 May
1978.
Conference Summary Papers:
M.D. Dorfman, E.v.K. Hill and Y. Zhao, “Ultimate
Strength Prediction in Fiberglass/Epoxy Beams Subjected
to Three-Point Bending Using Acoustic Emission and
Neural Networks,” ASNT Fall Conference &
Quality Testing Show 2004, American Society for
Nondestructive Testing, Columbus, OH, 2004, pp. 151-153.
E.v.K. Hill and E. Ibekwe, “Neural Network
Fatigue Life Prediction in 7075-T6 Aluminum from
Acoustic Emission Data,” ASNT Fall Conference
& Quality Testing Show 2004, American Society
for Nondestructive Testing, Columbus, OH, 2004,
p. 44.
S.G. Vaughn III and E.v.K. Hill, “In-Flight
Fatigue Crack Monitoring of an Aircraft Engine Cowling,”
ASNT Fall Conference and Quality Testing Show Paper
Summaries, American Society for Nondestructive Testing,
Columbus, OH, 1998, pp. 140-142.
C.L. Rovik and E.v.K. Hill, “Classification
of In-Flight Fatigue Cracks in Aircraft Structures
using Acoustic Emission and Neural Networks,”
ASNT Fall Conference and Quality Testing Show Paper
Summaries, American Society for Nondestructive Testing,
Columbus, OH, 1998, pp. 143-145.
D.L.W. Ballard and E.v.K. Hill, “Fatigue
Life Prediction of Edge-Welded Metal Bellows
using Neural Networks and Acoustic Emission
Amplitude Data,” ASNT Fall Conference
and Quality Testing Show Paper Summaries,
American Society for Nondestructive Testing,
Columbus, OH, 1998, pp. 146-149.
D.L.W. Ballard and E.v.K. Hill, “Detection
of Fatigue Crack Inception in Edge-Welded Metal
Bellows Using Acoustic Emission,” The 9th
Asia-Pacific Conference on Nondestructive Testing
in conjunction with ASNT's 1998 Spring Conference
and 7th Annual Research Symposium, American Society
for Nondestructive Testing, Columbus, OH, 1998,
pp. 228-231.
R.J. Demeski and E.v.K. Hill, "Classification
and Modeling of Acoustic Emission Failure Mechanism
Data from a Fiberglass/Epoxy Tensile Test Specimen,"
The 9th Asia-Pacific Conference on Nondestructive
Testing in conjunction with ASNT's 1998 Spring Conference
and 7th Annual Research Symposium, American Society
for Nondestructive Testing, Columbus, OH, 1998,
pp. 232-234.
E.v.K. Hill, J.L. Walker II, G.L. Workman and R. Reightler, "In-Process Monitoring of Aluminum-Lithium
Repair Welds Using Acoustic Emission Signal Analysis,"
ASNT 1996 Spring Conference, American Society for
Nondestructive Testing, Columbus, OH, 1996, pp. 53-55.
M.L. Marsden and E.v.K. Hill, "Classification
of Fatigue Cracks in Thin Aluminum Pressure Vessels
Using Acoustic Emission Parameter Data," ASNT
1995 Fall Conference, American Society for Nondestructive
Testing, Columbus, OH, 1995, pp. 42-44.
J.L. Walker II, G.L. Workman, S.S. Russell and
E.v.K. Hill, "A Neural Network/Acoustic Emission
Analysis of Impact Damaged Graphite/Epoxy Pressure
Vessels," ASNT 1995 Spring Conference, American
Society for Nondestructive Testing, Columbus, OH,
1995, pp. 106-108.
W.P. Thornton and E.v.K. Hill, "Identification
of Acoustic Emission Signals from Fatigue Crack
Growth in Thin Aluminum Pressure Vessels,"
ASNT 1995 Spring Conference, American Society for
Nondestructive Testing, Columbus, OH, 1995, pp. 112-114.
T.M. Ely and E.v.K. Hill, “Neural Network
Classification of Acoustic Emission Data from a
Graphite/Epoxy Tensile Test Specimen,” ASNT
1995 Spring Conference, American Society for Nondestructive
Testing, Columbus, OH, 1995, pp. 109-111.
H.L. Bodine, R.L. Daws, S.S. Henley and E.v.K. Hill, “Automatic Detection and Classification
of Cracks in Complex Structures,” ASNT 1995
Spring Conference, American Society for Nondestructive
Testing, Columbus, OH, 1995, pp. 115-117.
E.v.K. Hill, J.L. Walker II and G.H. Rowell, “Neural
Network Burst Pressure Prediction in Graphite/Epoxy
Pressure Vessels from Acoustic Emission Amplitude
Data,” ASNT 1994 Spring Conference, American
Society for Nondestructive Testing, Columbus, OH,
1994, pp. 161-163.
J.L. Walker II and E.v.K. Hill, “Back Propagation
Neural Networks for Predicting Ultimate Strengths
of Unidirectional Graphite/Epoxy Tensile Specimens,”
ASNT 1994 Spring Conference, American Society for
Nondestructive Testing, Columbus, OH, 1994, pp. 158-160.
T.M. Ely and E.v.K. Hill, “Characterization
of Longitudinal Splitting and Fiber Breakage in
Gr/Ep Using Acoustic Emission Data,” ASNT
1994 Spring Conference, American Society for Nondestructive
Testing, Columbus, OH, 1994, pp. 155-157.
A. Almeida and E.v.K. Hill, “Neural Network
Detection of Fatigue Crack Growth in Riveted Joints
Using Acoustic Emission,” ASNT 1994 Spring
Conference, American Society for Nondestructive
Testing, Columbus, OH, 1994, pp. 93-95.
E.v.K. Hill and G.L. Knotts, “A Neural Network
for Predicting Ultimate Strengths of Aluminum-Lithium
Welds from Acoustic Emission Data,” Sixth
International Symposium on Nondestructive Characterization
of Materials, Final Program and Abstracts, The Johns
Hopkins University, Baltimore, MD, 1993, p. 37.
E.v.K. Hill, “Predicting Ultimate Strengths
of Aluminum-Lithium (Al-Li) Welds Using Acoustic
Emission,” ASNT 1993 Spring Conference, American
Society for Nondestructive Testing, Columbus, OH,
1993, pp. 81-83.
M. Kouvarakos and E.v.K. Hill, “Identifying
Failure Mechanisms in a Fiberglass/Epoxy Tensile
Test Specimen Using Acoustic Emission Signal Parameters,”
ASNT 1992 Fall Conference, American Society for
Nondestructive Testing, Columbus, OH, 1992, pp. 253-260.
E.v.K. Hill, “Predicting Burst Pressures
in Filament Wound Composite Pressure Vessels Using
Acoustic Emission Data,” Third Conference
on Nondestructive Evaluation for Aerospace Requirements,
National Aeronautics and Space Administration, Washington,
DC, Conference Publication 3139, 1992, pp. 335-362.
J.L. Walker II and E.v.K. Hill, “Composite
Ultimate Strength Prediction from Acoustic Emission
Amplitude Data,” Third Conference on Nondestructive
Evaluation for Aerospace Requirements, K.W. Woodis
and G.L. Workman, Compilers, National Aeronautics
and Space Administration, Washington, DC, Conference
Publication 3139, 1992, p. 472.
E.v.K. Hill and D.M. Egle, “Acoustic Emission
and Fracture Mechanisms in Titanium,” 1982
Paper Summaries, ASNT National Spring and Fall Conferences,
American Society for Nondestructive Testing, Columbus,
OH, 1982, pp. 212 215.
E.v.K. Hill, “Acoustic Emission in Jet Engine
Fan Blades,” 1981 Paper Summaries, ASNT National
Spring and Fall Conferences, American Society for
Nondestructive Testing, Columbus, OH, 1981, pp. 273 276.
E.v.K Hill, “The Impulse Response of a Rectangular
Parallelepiped,” 1981 Paper Summa¬ries,
ASNT National Spring and Fall Conferences, American
Society for Nondestructive Testing, Columbus, OH,
1981, pp. 159 160.
E.v.K. Hill and D.M. Egle, “The Forced Vibrational
Response of the Rectangular Parallelepip¬ed
with Rigid Lubricat¬ed Boundaries,” Advanc¬es
in Acoustic Emission, Dunhart Publishers, Knoxville,
TN, 1981, p. 382.
Conference/Symposium Presentations:
E.v.K. Hill, A.M. Gunasekera, M.W. Langdon and
W.D. Rice, “Compression-After-Impact Strength
Prediction in Graphite/Epoxy Laminates Using Acoustic
Emission and Artificial Neural Networks,”
52nd Acoustic Emission Working Group Meeting (AEWG-52),
Sturgeon Bay, WI, 19-21 October 2009.
E.v.K. Hill and Muhammed A. Okur, “Neural
Network Fatigue Life Prediction in Aluminum
from Acoustic Emission Data,” 52nd Acoustic
Emission Working Group Meeting (AEWG-52),
Sturgeon Bay, WI, 19-21 October 2009.
E.v.K. Hill, A. Korcak, J. Suleman and F.F. Barsoum,
“Acoustic Emission Monitoring and Neural Network
Fatigue Life Prediction in Steel Bridges,”
52nd Acoustic Emission Working Group Meeting (AEWG-52),
Sturgeon Bay, WI, 19-21 October 2009.
A.M. Gunasekera, M.W. Langdon, T.A. Olaniyan, W.D. Rice and E.v.K. Hill, “Compression After Impact
Strength Prediction in Graphite/Epoxy Laminates
Using Acoustic Emission and Artificial Neural Networks,”
Embry-Riddle Student Mathematics Conference, Embry-Riddle
Aeronautical University, Daytona Beach, FL, 11 April
2009.
J. Suleman, L.N.S. Chitikela, E.v.K. Hill, E. Villa
and M.A. Okur, “Neural Network Fitigue Life
Prediction in Aluminum from Acoustic Emission Data,”
Embry-Riddle Student Mathematics Conference, Embry-Riddle
Aeronautical University, Daytona Beach, FL, 11 April
2009.
A.M. Taylor, A.B. Pacific, E.v.K. Hill, J.L. Walker
II and M.D. Dorfman, “An Introduction to Neural
Networks,” Embry-Riddle Student Mathematics
Conference, Embry-Riddle Aeronautical University,
Daytona Beach, FL, 11 April 2009.
M.K. Horvath, A.R. Mueller and E.v.K. Hill, “Prediction
Methods: Statistics and Neural Networks,”
4th Annual Embry-Riddle Undergraduate Mathematics
Conference, Embry-Riddle Aeronautical University,
Daytona Beach, FL, 31 March 2007.
J.D. Burch, N. Bousquet, T. Ebert and E.v.K. Hill,
“Predicting Compression After Impact Strength
in Composite Laminates Using Neural Networks,”
4th Annual Embry-Riddle Undergraduate Mathematics
Conference, Embry-Riddle Aeronautical University,
Daytona Beach, FL, 31 March 2007.
S. -A.T. Dion, J.O. Karl, N.S. Spivey and E.v.K. Hill, “Burst Pressure Prediction in Composite
Overwrapped Pressure Vessels Using Neural Networks
and Acoustic Emission Data,” American Society
for Nondestructive Testing 15th Annual Research
Symposium, Orlando, FL, 16 March 2006.
S. -A.T. Dion, J.O. Karl, N.S. Spivey and E.v.K. Hill, “Burst Pressure Prediction in Composite
Overwrapped Pressure Vessels,” 9th Annual
FAA Commercial Space Transportation Conference,
Washington, DC, 9-10 February 2006.
C.D. Hess, E.v.K. Hill and Y. Zhao, “Residual
Compressive Strength Prediction in Impact Damaged
Carbon/Epoxy Laminates Using Neural Networks,”
American Society for Nondestructive Testing Fall
Conference & Quality Testing Show, Pittsburgh,
PA, 15 October 2003.
D.R. Lendzioszek and E.v.K. Hill, “Neural
Network Classification and Modeling of Acoustic
Emission Data from a Fiberglass/Epoxy Tensile Test
Specimen,” American Society for Nondestructive
Testing 12th Annual Research Symposium, Orlando,
FL, 11 March 2003.
R. Nixon and E.v.K. Hill, “Neural Network
Ultimate Strength Prediction in a Composite I-Beam
Using Acoustic Emission Data,” American Society
for Nondestructive Testing 12th Annual Research
Symposium, Orlando, FL, 11 March 2003.
C.D. Hess and E.v.K. Hill, “Ultimate
Strength Prediction in Impact Damaged Composite
Laminates,” American Society for Nondestructive
Testing 12th Annual Research Symposium, Orlando,
FL, 11 March 2003.
D.R. Lendzioszek, K.M. Kostreva, E.v.K. Hill and
Y. Zhao, “Acoustic Emission Use in Composites
with Neural Network Applications,” College
of Engineering Colloquium, Embry-Riddle Aeronautical
University, Daytona Beach, FL, 19 September 2002.
E.C. Fatzinger and E.v.K. Hill, “Low Proof
Load Prediction of Ultimate Loads in Fiberglass/Epoxy
I-Beams Using Acoustic Emission,” American
Society for Nondestructive Testing Spring Conference
and 11th Annual Research Symposium, Portland, OR,
19 March 2002.
E.C. Fatzinger and E.v.K. Hill, “Low Proof
Load Prediction of Ultimate Strengths in Fiberglass/Epoxy
I-Beams Using Acoustic Emission Data,” American
Society for Nondestructive Testing Spring Conference
and 10th Annual Research Symposium, Denver, CO,
28 March 2001.
E.v.K. Hill, “Low Proof Load Prediction of
Burst Pressures in Composite Pressure Vessels Using
Acoustic Emission,” Central Florida Section
Meeting, American Society for Nondestructive Testing,
Cocoa, FL, 21 September 2000.
C.L. Rovik and E.v.K. Hill, “Neural Network
Classification of In-Flight Fatigue Cracks in Aircraft
Structures,” Embry-Riddle Aeronautical University
Colloqium, Daytona Beach, FL, 19 November 1998.
M.L. Marsden and E.v.K. Hill, “Classification
of Fatigue Crack Growth in Thin Aluminum Pressure
Vessels Using Acoustic Emission Parameter Data,”
Embry-Riddle Aeronautical University Colloquium,
Daytona Beach, FL, 8 April 1996.
E.v.K. Hill, J.L. Walker II and G.H. Rowell, “Neural
Network Burst Pressure Prediction in Graphite/Epoxy
Pressure Vessels from Acoustic Emission Amplitude
Data,” Embry-Riddle Aeronautical University
Colloquium, Daytona Beach, FL, 16 September 1993.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Nondestructive Testing of Filament Wound Composite
Rocket Motor Cases (Part I),” Spring Conference
on Experimental Mechanics, Las Vegas, NV, 11 June
1985.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Nondestructive Testing of Filament Wound Composite
Rocket Motor Cases (Part II),” Spring Conference
on Experimental Mechanics, Las Vegas, NV, 11 June
1985.
E.v.K. Hill and T.J. Lewis, “Observations
on Acoustic Emission from a Graphite/Epoxy Cylinder
Loaded in Compression,” 8th Meeting of the
Committee on Acoustic Emission from Reinforced Plastics
(CARP), Society of the Plastics Industry, Salt Lake
City, UT, 6 March 1984.
E.v.K. Hill, “AE Applications in the Solid
Rocket Motor Industry,” ASNT/ASQC/SME jointly
sponsored QualTest 2, Dallas, TX, 25 October 1983.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Testing of Filament Wound Composite Rocket Motor
Cases,” ASNT/ASQC/SME jointly sponsored QualTest
2, Dallas TX, 26 October 1983.
E.v.K. Hill, “Wave Propagation in the Rectangular
Parallelepiped,” 25th Meeting of the Acoustic
Emission Working Group, Princeton, NJ, 27 June 1983.
Conference/Symposium Presentations (Continued):
E.v.K. Hill, “The Response of the Rectangular
Parallelepiped to a Simulated Acoustic Emission
Burst,” 100th Meeting of the Acoustical Society
of America, Los Angeles, CA, November 1980.
E.v.K. Hill, “The Forced Vibrational Response
of a Rectangular Parallelepiped with Stress Free
Boundaries,” 98th
Meeting of the Acoustical Society of America, Salt
Lake City, UT, November 1979.
E.v.K. Hill, “The Forced Vibrational Response
of the Rectangular Parallelepip¬¬ed,”
First Annual Oklahoma Mini Symposium, American Institute
of Aeronautics and Astronautics, Universi¬ty
of Oklahoma, Norman, OK, 24 February 1979.
Invited Presentations:
E.v.K. Hill, S.G.Vaughn III, and C.L. Rovik, “In-Flight
Fatigue Crack Monitoring in Aircraft Using Acoustic
Emission and Neural Networks,” Invited Presentation,
51st Acoustic Emission Working Group Meeting, University
of Memphis, Memphis, TN, 13-15 October 2008.
E.v.K. Hill, C.D. Hess and Yi Zhao, “Residual
Compressive Strength Prediction in Impact Damaged
Graphite/Epoxy Laminates,” Invited Presentation,
Sigma Gamma Tau National Honor Society Induction
Banquet, Embry-Riddle Aeronautical University, Daytona
Beach, FL, 17 November 2007.
E.v.K. Hill, C.D. Hess, Y. Zhao, J.O. Karl, S. -A.T. Dion and N.S. Spivey, “Neural Network Applications
in Nondestructive Evaluation,” Invited Presentation,
Mathematical Association of America Student Chapter
Meeting, Embry-Riddle Aeronautical University, Daytona
Beach, FL, 30 November 2006.
E.v.K. Hill, “Low Proof Load Prediction of
Burst Pressures in Composite Pressure Vessels Using
Acoustic Emission,” Invited Presentation,
Central Florida Section Meeting, American Society
for Nondestructive Testing, Cocoa, FL, 21 September
2000.
Short Courses:
J.L. Walker II and E.v.K. Hill, “Acoustic
Emission Methods,” Course Handout, American
Society for Nondestructive Testing Short Course,
Columbus, OH, 1999.
E.v.K. Hill, “An Introduction to Neural Networks,”
Short Course Handout, Physical Acoustics Corporation,
Princeton, NJ, 1995.
E.v.K. Hill, “Fault Tree Analysis as Applied
to Transit Operations,” Short Course Handout,
U.S. Department of Transportation, Federal Aviation
Administration, Transportation Safety Institute,
Oklahoma City, OK, 1978.
E.v.K. Hill, “Fault Tree Analysis as Applied
to Aircraft Accident Investigation,” Short
Course Handout, U.S. Department of Transportation,
Federal Aviation Administration, Transportation
Safety Institute, Oklahoma City, OK, 1977.
Other:
E.v.K. Hill, “An Engineering Review of the
Physical Acoustics Corporation Test Procedure for
Acoustic Emission Testing of Above-Ground Storage
Tanks,” Final Report, Physical Acoustics Corporation,
Princeton, NJ, 1996.
E.v.K. Hill, “Hot Cracking of Welds in the
2195 Aluminum-Lithium Alloy,” Final Report,
University of Alabama in Huntsville, Center for
Automation and Robotics, Huntsville, AL, 1995.
R.L. Dawes, H.L. Bodine, and E.v.K. Hill, “Automatic
Detection and Classification of Cracks in Complex
Structures, Applying the Parametric Avalanche Stochastic
Filter to Acoustic Emissions,” Martengale
Research Corporation, Allen, TX, Final Report, National
Science Foundation, Phase I Small Business Innovation
Research (SBIR) Project, 1994
E.v.K. Hill, “Burst Pressure Prediction from
Acoustic Emission Amplitude Distribution Weighting
Functions,” Publication No. 85357, Morton
Thiokol, Inc. , Wasatch Division, Brigham City, UT,
1985.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Nondestructive Testing of Filament Wound Composite
Rocket Motor Cases,” Publication No. 85281,
Morton Thiokol, Inc. , Wasatch Division, Brigham
City, UT, 1984.
E.v.K. Hill, “Acoustic Emission Applications
in the Solid Rocket Motor Industry,” Publication
No. 84195, Morton Thiokol, Inc. , Wasatch Division,
Brigham City, UT, 1984.
E.v.K. Hill, “Recommended Acoustic Emission
Testing for STA-2 [Space Shuttle Solid Rocket Booster
Filament Wound Case Static Test Article-2],”
Publication No. 84129, Morton Thiokol, Inc. , Wasatch
Division, Brigham City, UT, 1983.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Testing of Filament Wound Composite Rocket Motor
Cases,” Publication No. 84036, Morton Thiokol,
Inc. , Wasatch Division, Brigham City, UT, 1983.
E.v.K. Hill and D.M. Egle, “Characterization
of Fatigue Failure Mechanisms in Titanium Jet Engine
Fan Blades Using Acoustic Emission,” Publication
No. 84005, Morton Thiokol, Inc. , Wasatch Division,
Brigham City, UT, 1984.
E.v.K. Hill, “Acoustic Emission: A New Dimension
in Quality Control,” Impulse, Vol. 1, No. 7, Morton Thiokol, Inc. , Wasatch Division, Brigham
City, UT, 1983.
E.v.K. Hill and T.J. Lewis, “Acoustic Emission
Testing of Peacekeeper Missile Cases,” Publication
No. 83384-1A, Morton Thiokol, Inc. , Wasatch Division,
Brigham City, UT, 1983.
E.v.K. Hill, “Acoustic Emission Testing of
Peacekeeper (MX) Missile Cases,” Publication
No. 83280, Morton Thiokol, Inc. , Wasatch Division,
Brigham City, UT, 1983.
E.v.K. Hill, “Acoustic Emission (AE) Nondestructive
Testing (FWC) [Space Shuttle Solid Rocket Booster
Filament Wound Case],” Publication No. 83231,
Morton Thiokol, Inc. , Wasatch Division, Brigham
City, UT, 1983.
E.v.K. Hill, “Acoustic Emission (AE) Nondestructive
Testing (Peacekeeper) [MX Missile],” Publication
No. 83230, Morton Thiokol, Inc. , Wasatch Division,
Brigham City, UT, 1983.
E.v.K. Hill, “Acoustic Emission Nondestructive
Testing,” Publication No. 82597, Morton Thiokol,
Inc. , Wasatch Division, Brigham City, UT, 1982.
E.v.K. Hill, “Acousto-Ultrasonic Nondestructive
Testing,” Publication No. 82596, Morton
Thiokol, Inc. , Wasatch Division, Brigham City,
UT, 1982.
E.v.K. Hill, “The Vibrational Response of
the Rectangular Parallelepiped,” Ph.D. Dissertation,
University of Oklahoma, Norman, OK, 1980.
E.v.K. Hill and B. Parrish, “Determining
the Spalling Resistance of Refractories, Volume
I, Operations Manual,” Final Report, Dunegan/Endevco
Corporation, San Juan Capistrano, CA, 1980.
E.v.K. Hill and B. Parrish, “Determining
the Spalling Resistance of Refractories, Volume
II, Test Results,” Final Report, Dunegan/Endevco
Corporation, San Juan Capistrano, CA, 1980.
E.v.K. Hill, “A General Description of the
AIAG Quantity/Quality Performance Indicator System,”
Headquarters Oklahoma City Air Materiel Area, Air
Force Logistics Command (AFLC), Tinker Air Force
Base, OK, 1973.
STATE & NATIONAL TRACK & FIELD HONORS AND
AWARDS
2009 Summer National Senior Games –
The Senior Olympics: 3rd place – 4x100m
2009 Wyoming Senior Olympics: 2nd place –
50m, 100m, 200m, high jump, and javelin; 3rd place
– long jump and shot put
2009 Utah Summer Games: 1st place – 100m,
100m high hurdles, 200m, and 4x100m relay
2009 U.S. Masters All-American - 100m high hurdles
(19.09s)
2008 Florida Senior Games State Championships: 1st
place – 4x100m relay; 2nd place – long
jump
2008 USA Track & Field (USATF) National Masters
Championships: 4th place 4x100m relay
2008 Wyoming Senior Olympics: 1st place - high jump
and 200m; 2nd place - javelin and 50m; 3rd place
- long jump and 100m
2008 USATF Utah Masters Championships: 1st place
- long jump, 100m high hurdles, 100m, and 200m
2008 Montana Senior Olympics: 1st place - 60m and
long jump; 2nd place - 100m, 200m, and high jump
2007 U.S. Masters All-American - 60m (8.62s) and
100m high hurdles (19.05s)
2007 State Games of America: 1st place - 100m high
hurdles and 300m intermediate hurdles; 3rd place
- 50m and long jump
2007 Summer National Senior Games -- The Senior
Olympics: 3rd place - 4x100m relay
2007 Florida Sunshine State Games: 1st place - 100m
high hurdles; 2nd place - long jump; 3rd place -
100m and 200m
2006 Florida Senior Games State Championships: 1st
place - long jump and 4x100m relay; 3rd place -
100m
2006 Wyoming Senior Olympics: 1st place - 100m and
200m; 2nd place - 50m, long jump, high jump, and javelin; 3rd place - shot put and discus
2006 Florida Sunshine State Games: 1st place - 100m
and shot put; 2nd place - 100m high hurdles, 200m,
high jump, and long jump
2006 USATF Florida Masters Championships: 1st place
- 100m high hurdles, 200m, and high jump; 2nd place
- 100m; 3rd place -
long jump
2005 Florida Senior Games State Championships: 2nd
place - long jump, high jump, and 200m
2005 Wyoming Senior Olympics: 1st place - 50m, 100m,
200m, 400m, and high jump; 2nd place - long jump,
shot put, and javelin;
3rd place - discus
2005 State Games of America: 1st place - 4x400m
relay; 4th place - 400m intermediate hurdles; 6th
place - 200m and 100m high hurdles; and 7th place
- 100m
2005 U.S. Masters All-American - indoor pentathlon
(2,712 points)
2004 Florida Senior Games State Championships: 3rd
place - 400m
2004 USATF National Masters Championships: 6th place
- 400m intermediate hurdles; and 7th place - 100m
high hurdles
2004 USATF Northwest Regional Masters Championships:
1st place - 100m
2004 Utah Summer Games: 1st place - 100m high hurdles,
400m intermediate hurdles*, and 200m*; and 3rd place
- 100m (*age
group record)
2004 USATF Florida Masters Championships: 1st place
- 100m high hurdles and 200m; 2nd place - 200m;
3rd place - shot put;
and 4th place - discus
2004 U.S. Masters All-American - 100m high hurdles
(16.72s)
2003 Florida Senior Games State Championships: 3rd
place - 400m
2003 Who's Who in the National Senior Games Association
2003 Wyoming Senior Olympics: 1st place - 400m,
long jump, and high jump; 2nd place - 100m and 200m;
and 3rd place - 50m,
shot put, discus, and javelin
2003 USATF Florida Masters Championships: 1st place
- 100m high hurdles, 400m intermediate hurdles;
2nd place - 200m; and
3rd place - 100m
2002 Wyoming Senior Olympics: 1st place - 50m, 100m,
200m, 400m, long jump, shot put, and discus
2002 USATF Northwestern Regional Masters Championships:
1st place - 100m high hurdles and 400m; and 2nd
place - 100m
2001 USATF National Masters Championships: 6th place
- 400m intermediate hurdles
2001 USATF South Carolina Masters Championships:
1st place - 100m, 100m high hurdles and 400m intermediate
hurdles; and
2nd place - 200m, 400m and long jump
2001 USATF Florida Masters Championships: 1st place
- 100m, 100m high hurdles, long jump and javelin;
and 2nd place - 200m,
shot put and discus
2001 USATF Georgia Masters Championships: 2nd place
- long jump; and 3rd place - 200m and 400m
2000 Florida Senior Games State Championships: 3rd
place - 400m
2000 USATF National Masters Championships: 6th place
- 100m high hurdles; and 3rd place - 400m intermediate
hurdles
2000 Wyoming Senior Olympics: 2nd place - 50m, 100m,
200m, long jump; and 3rd place - 400m
2000 USATF Southeastern Regional Masters Championships:
1st place - 100m high hurdles and 400m intermediate
hurdles (67.58s: U.S. Masters All-American)
1999 Florida Senior Games State Championships: 1st
place - 400m and high jump; 2nd place - 200m and
shot put; 3rd place - long jump and discus; and
4th place - 100m and javelin
1999 National Senior Games -- The Senior Olympics:
8th place - 400m
1999 USATF National Masters Championships: 5th place
- 100m high hurdles; and 6th place - 400m intermediate
hurdles
1999 USATF Eastern Masters Regional Championships:
3rd place - 400m intermediate hurdles
1999 USATF Florida Masters Championships: 1st place
- 100m high hurdles, 100m, 200m, 400m, and long
jump; 3rd place - shot
put and discus; and 4th place - javelin
1998 Florida Senior Games State Championships: 2nd
place - 400m and high jump
1998 USATF National Masters Championships: 5th place
- pentathlon; 6th place - 100m high hurdles; and
12th place - long jump
1998 USATF Florida Masters Championships: 1st place
- 100m high hurdles, long jump, and 1500m; 2nd place
- 100m, shot
put, and javelin; and 3rd place - 200m and discus
1997 Florida Senior Games State Championships: 1st
place - 100m, 200m, and long jump; 2nd place - 400m;
and 3rd place -
discus
1997 USATF Florida Masters Championships: 2nd place
- 100m and 200m
1996 Florida Senior Games State Championships: 1st
place - 200m; and 4th place - 100m
|
Download to Microsoft Word
Download to Adobe PDF